Dinding interior menghadapi banyak kesulitan - baik karena memindahkan furnitur atau sekadar ujian waktu - yang menyebabkan lubang, retakan, permukaan yang tidak rata, dan ketidaksempurnaan. Baik untuk perbaikan kecil, proyek renovasi, atau konstruksi yang benar-benar baru, Sika menawarkan solusi sempurna untuk meratakan, memperbaiki, dan menyelesaikan dinding interior Anda dengan produk berbasis gipsum, berbahan dasar semen, dan berbasis dispersi. Produk dinding kami yang siap pakai mudah dikerjakan dan menghasilkan hasil akhir yang rata dan mulus pada dinding Anda.

Product Range

Sika Has a Full Range of Solutions for Perfect Walls

Thick Layer Plastering on wall
Thick layer plastering
 
Thin layer plastering and skim coating of an interior wall
Thin layer plastering and skim coating
Interior wall leveling and painting with decorative finishing
Decorative finishing with paints
Joint filling and finishing of drywall and gypsum boards with joint compound
Joint filling and finishing of drywall and gypsum boards with joint compound
Filling and leveling over small cracks and holes with crack-filler
Filling and leveling over small cracks and holes with crack-filler

Key Brand

SikaWall®

Concrete and Masonry Wall and Ceiling Finishing Using Plaster or Skim Coat

The amount of layers may differ, depending on the final optical appearance required.

  1. Substrate – concrete or masonry/brick wall
  2. Preparation of substrate – concrete repair, crack filler, primer
  3. Thick layer for first leveling (e.g. masonry) – plastering
  4. Thin layer(s) for smoothing – plastering, skim coat
  5. Final coatings – post-treatment, paint, wallpaper, tiling

Various Techniques to Finish Drywall Construction (Gypsum Board)

The amount of layers may differ, depending on the final quality level required.

  1. Substrate – drywall/gypsum board/plaster board
  2. Crack/holes in the substrate – crack filler
  3. Paper tape embedded in joint compound
  4. Covering and finishing of joints and nail holes
  5. Full surface leveling – skim coat (if required for highest quality standards)
  6. Final coat – primer for painting (if necessary), full surface painting in several layers