Product Data Sheet Show all documents
Sika® Tile Grout

Sika® Tile Grout

CEMENTITIOUS GROUT FOR TILES GAPS

Sika® Tile Grout is a one component, pre-packed tile grout combining cement with selected pigment and several admixtures. It fills the spaces between tiles, provides stability, and also aesthetic function.

  • Prevent cracks
  • Non-Sag / slump (thixotropic) application
  • Consistent colour quality
  • Easy to use and apply, just add water
Product Data Sheet Show all documents

Usage

For filling the spaces of homogeneous tile, ceramic tile, marble, granite, mosaic, and natural stone, over a range of applications as below:
  • Floor and wall
  • Interior and exterior
  • Dry and wet area*
* For wet area, mix Sika® Tile Grout with SikaCim® Tile Grout Additive.  

Advantages

  • Prevent cracks
  • Non-Sag / slump (thixotropic) application
  • Consistent colour quality
  • Easy to use and apply, just add water

Packaging

1 kg bag x 25 pcs in box

Colour

Powder / available in different colours (see colour chart)

Product Details

Product Information

Shelf life

9 months from date of production if stored properly in original, unopened and undamaged sealed packaging

Storage conditions

Store in dry conditions at temperatures between +5 °C and +30 °C.

Density

~1.86 kg/L

Application

Application Information

Mixing ratio

Water : Sika® Tile Grout =0.33 L : 1 kg (by weight)
Water : Sika® Tile Grout =1 : 2.5 (by volume)

Ambient air temperature

+15 °C to +40 °C

Pot Life

~1 hour

Applied product ready for use

FOOT TRAFFIC TIME

After 24 hours
Consumption

Consumption

Tile size (mm)Joint Width (mm)Consumption (kg/m2)
200x200x61
3		0.48
1.44
300x300x61
3		0.36
1.08
400x400x61
3		0.24
0.72
600x600x101
3		0.2
0.6
Application steps

MIXING

  • For dry area : pour 0.33 litre of water into mixing vessel then add Sika® Tile Grout slowly and mix properly.
  • For wet area : pour 0.33 litre of SikaCim® Tile Grout Additive into mixing vessel then add Sika® Tile Grout slowly and mix properly.
  • Mixing time is ~3 minutes. A slow speed mixer is recommended (300 – 600 rpm).
 

APPLICATION

  • Apply the grout to spaces between tiles diagonally using rubber trowel.
  • After the grout sets for ~10 minutes, wipe up the excess grout with damp sponge from the tile surfaces.
  • Run the sponge over the grout joints to get consistent, even-depth grout joints.
  • Waiting time before foot traffic minimum 24 hours.

Documents