Product Data Sheet Show all documents

SikaMur®-132 Thin bed

LIGHT BRICK ADHESIVE

SikaMur®-132 Thin bed is a one component, pre-packed polymer modified light brick adhesive mortar combining cement with selected grades of sand and several admixtures.

  • Excellent adhesion
  • More efficient, only 3 mm thickness
  • Faster working process
  • Light brick can be arranged higher than conventional mortar
  • Can be plastered in 1 x 24 hours
  • Easy to use and apply, just add water
Product Data Sheet Show all documents

Usage

For bonding of light brick with thin bed system (3 mm thickness)  

Advantages

  • Excellent adhesion
  • More efficient, only 3 mm thickness
  • Faster working process
  • Light brick can be arranged higher than conventional mortar
  • Can be plastered in 1 x 24 hours
  • Easy to use and apply, just add water

Packaging

40 kg bag

Colour

Powder / Grey

Product Details

Product Information

Shelf life

3 months from date of production if stored properly in original, unopened and undamaged sealed packaging.

Storage conditions

Store in dry conditions at temperatures between +5 °C and +30 °C.

Density

~1.65 kg/L
Technical Information

Compressive Strength

28 days

~12 N/mm2

Tensile Adhesion Strength

28 days

~0.5 N/mm2

Application

Application Information

Mixing Ratio

Water : SikaMur®-132 Thin bed

10 – 10.4 L : 40 kg (by weight)

Water : SikaMur®-132 Thin bed1 : ± 2.5 (by volume)

(as per consistency requirement)

Layer Thickness

3 mm

Ambient Air Temperature

+8 °C to +40 °C

Pot Life

~1 h (at +30 °C)

Waiting Time / Overcoating

Waiting Time Before Plastering > 24 h
Consumption

Consumption

~10 m2 / 40 kg bag / 3 mm (light brick with 10 cm thickness)*
~16 m2 / 40 kg bag / 3 mm (light brick with 7.5 cm thickness)*
*depend on substrate surface profile
Application steps

MIXING

  • Pour 10 – 10.4 litre of water into mixing vessel then add SikaMur®-132 Thin bed slowly and mix properly
  • Mixing time is ~3 minutes. A slow speed mixer is recommended (300 – 600 rpm)

APPLICATION

  • Apply with notched trowel then fix the light brick. Proceed to apply while the adhesive is still wet. Width of the trowel depending on the light brick thickness
  • Waiting time before plastering application minimum 24 hours. To get the best result use SikaWall®-162 P.

Documents