Product Data Sheet Show all documents

SikaWall®-162 P

PLASTER AND BRICK ADHESIVE

SikaWall®-162 P is a one component, pre-packed polymer modified mortar combining cement with selected grades of sand and several admixtures; used as light brick plaster, red brick plaster, and red brick adhesive.

  • Multi function for plaster and brick adhesive
  • Excellent adhesion
  • Prevents hair cracks caused by material shrinkage
  • More efficient, only 10 mm thickness for both type of application
  • Easy to use and apply, just add water
Product Data Sheet Show all documents

Usage

For plaster can be applied on various surface, such as :
  • Light brick and red brick surface.
  • Concrete surface that have been treated with bonding agent (e.g. Sika Latex® or SikaBond® NV)
 

Advantages

  • Multi function for plaster and brick adhesive
  • Excellent adhesion
  • Prevents hair cracks caused by material shrinkage
  • More efficient, only 10 mm thickness for both type of application
  • Easy to use and apply, just add water

Packaging

50 kg bag

Colour

Powder / Grey

Product Details

Product Information

Shelf life

3 months from date of production if stored properly in original, unopened and undamaged sealed packaging.

Storage conditions

Store in dry conditions at temperatures between +5 °C and +30 °C.

Density

~1.65 kg/L
Technical Information

Compressive Strength

28 days

~6 N/mm2

Tensile Adhesion Strength

28 days

~0.3 N/mm2

Application

Application Information

Mixing Ratio

Water : SikaWall®-162 P

7.5 - 8.0 L : 50 kg (by weight)

Water : SikaWall®-162 P1 : ± 3.5 (by volume)

Layer Thickness

For red brick laying : 10 mm (max. thickness 15 mm)
For plastering : 10 mm (max. thickness 15 mm)

Ambient Air Temperature

+8 °C to +40 °C

Pot Life

~1 hours (at +30 °C)

Waiting Time / Overcoating

As brick adhesive before plaster – after 24 h
As plaster before skim coat – after 7 d
Consumption

Consumption

Red Brick Adhesive :
~1.56 m2 per 50 kg bag (based on 10 mm thickness)*
Plaster :
Light brick : ~2.6 m2 per 50 kg bag (based on 10 mm thickness)*
*depend on substrate surface profile
Application steps

MIXING

  • Pour 7.5 – 8 Liter of water into mixing vessel then add SikaWall®-162 P slowly and mix properly.
  • Mixing time is ~3 minutes. A slow speed mixer is recommended (300 – 600 rpm).

APPLICATION

As Brick Adhesive

  • Apply with scoop then fix the brick. Proceed to apply while SikaWall®-162 P is still wet.
  • Waiting time before plaster application minimum 24 hours. To get the best result use SikaWall®-162 P (plaster).

As Plaster

  • Apply with flat trowel.
  • Waiting time before skim coat application minimum 7 days. To get the best result use SikaWall®-182SC (skimcoat).
 

CLEANING OF EQUIPMENT

Clean all tools and application equipment with water immediately after use.

Hardened / cured material can only be mechanically removed.

Documents