Igas® B new

HOT-APPLIED ELASTOMERIC CONCRETE JOINT SEALANT

A hot applied modified bitumen. It has excellent adhesion property, non-permeable to water mild chemical solutions, ultra-violet resistance and non-flow or dip under direct sunlight.

Igas® B new possesses the following beneficial properties:
  • Remains flexible at low temperatures.
  • Non flow or dip under direct sunlight.
  • Good weather resistance.
  • Waterproof.
  • Good adhesion to concrete surface.
Product Data Sheet Show all documents

Overview

Usage

Igas® B new is used as follow :
  • As sealant and filler for all construction or expansion joints.
  • As sealant and filler for weak points and surface cracks on concrete roof.
  • Bonding of floor tiles.
 

Advantages

Igas® B new possesses the following beneficial properties:
  • Remains flexible at low temperatures.
  • Non flow or dip under direct sunlight.
  • Good weather resistance.
  • Waterproof.
  • Good adhesion to concrete surface.

Packaging

20 kg tin

Colour

Black

Product Details

Composition

Thermoplastic

Shelf life

24 months under good storage conditions and in undamaged containers.

Storage conditions

Store in dry condition, cool, and shaded place.

Density

1.10 - 1.16

Solid content

100 %

Chemical Resistance

Resistant to water, saturated salt solutions, mild acids and alkalis

Joint Design

Minimum joint depth:

10 mm

Width : depth ratio for expansion joints:

1 : 1 to 1 : 1.5

Width : depth ratio for construction and contraction joints:

1 : 1 to 1 : 2.5

Application

SUBSTRATE PREPARATION

  • All surfaces must be clean, dry and free from all loosely adhering particles.
  • For treatment of weak points and cracks hack a ‘V’ shape groove not smaller than 40 mm width and 25 mm depth along the weak point or crack.

CLEANING OF EQUIPMENT

Clean all tools and equipment immediately after use Kerosene or other strong solvent.

Documents