SikaGrout®-215 (new)

6 months from the date production if stored in undamage and unopened original sealed bags

Stored in dry condition between +10 °C - +30 °C

~2.20 kg/L

Recommended thickness is 20 - 100 mm

< +30 °C

+10 °C - +35 °C

4.0 L per 25 kg bag (water per powder = 16 % by weight)

+10 °C - +35 °C

25 min

4 - 8 h

~1 900 kg/m³ of mortar

~13.18 L per 25 kg bag

Put measured quantity of water (depend on the required consistency) into a mixing vessel. Add slowly the total contents of SikaGrout®-215 (new) while mixing. Mix continuously for 3 minutes to achieve even consistency. Use a mechanically low speed drill (400 - 600 rpm) with mixing paddle or appropriately sized mortar mixer.

Within 25 minutes after mixing, place grout into forms from one side to avoid air entrapment. Do not vibrate. Use a suitable head box of 150-200 mm and maintain the grout head at all times to ensure a continuous flow. Gentle tapping or pulling loops of wire from one side may assist the flow of the mortar under difficult working conditions.

Wet cure for a minimum 3 days with wet hessian, plastic sheet or apply a curing compound (Antisol)

Clean all tolls and application equipment with water immediately after use. Hardened and / or cured material can only be remove mechanically.