Product Data Sheet Show all documents
SikaCoat®

SikaCoat®

MULTIPURPOSE FLEXIBLE ACRYLIC BASED LIQUID APPLIED MEMBRANE

One component multipurpose flexible acrylic based liquid applied membrane. It can be applied on parapet walls, external walls, etc.

  • Alkali resistant
  • Easy application.
  • Excellent hiding power.
  • Thixotropic product.
  • High elasticity.
  • Excellent UV stability.
  • Impermeable.
  • Crack bridging ability.
  • Can be diluted with 10 % water (we only recommend for priming).
  • Low consumption.
Contact our Waterproofing Experts
Product Data Sheet Show all documents

Usage

  • SikaCoat used for old plastering* or re-coating
  • Finishing
  • Sealing joints, laps and roofing screws on various kind of roofs (roof tile, asbestos, zinc)
  • Parapet walls
  • External walls
*28 days old concrete with moisture < 11 % and pH < 7  

Advantages

  • Alkali resistant
  • Easy application.
  • Excellent hiding power.
  • Thixotropic product.
  • High elasticity.
  • Excellent UV stability.
  • Impermeable.
  • Crack bridging ability.
  • Can be diluted with 10 % water (we only recommend for priming).
  • Low consumption.

Packaging

20 kg, 4 kg pail

Colour

Grey, Stone Grey, White, and Latte.

Product Details

Product Information

Composition

Aqueous Acrylic Dispersion

Shelf life

12 months from date of production

Storage conditions

Stored properly in original, unopened and undamaged sealed packaging in dry conditions at temperatures between +5 °C and +30 °C and protect from direct sunlight.

Density

~1.3 ± 0.05 kg/L (at +30 °C)

(EN ISO 2811-1)
System information

System structure

Without Membrane System (DFT ~200 micron) :

First coat :

1 x SikaCoat®

Second coat1 x SikaCoat®
Technical Information

Tensile strength

> 2 N/mm2  (without membrane)

(ASTM D412: 2006a (2013))

Adhesion in peel

> 1.5 N/mm2  (without membrane)

(ASTM D4541:2002)

 

Application

Application Information

Ambient air temperature

< 35 °C

Substrate temperature

< 35 °C

Drying time

> 3 hours depending upon ambient conditions

Applied product ready for use

Without membrane

First Coat

: consumption : 0.3 kg/m2

Subsequent Coats: consumption : 0.3 kg/m2
Application steps

SUBSTRATE PREPARATION

SURFACE PREPARATION
Surface must be clean, sound and properly cured. Remove all loose materials mechanically, preferably with a wire brush. Iron and steel surfaces should be free of rust.

APPLICATION

For Wall (Without Membrane):

  • For porous substrate, apply first coat diluted with 10% water as primer layer. Allow enough drying time (>3 hours).
  • Apply SikaCoat® in two coats (0.3 kg/m2/coat), by brush or roller.

For Detailing Area (With Membrane):

  • For porous substrate, apply first coat diluted with 10% water as primer layer. Allow enough drying time (>3 hours).
  • Apply a first coat (0.8 - 1 kg/m2) of SikaCoat® by brush or roller.
  • Embed the SikaCoat® membrane into the first coat while it is still wet. Ensure that the membrane is thoroughly embedded and smooth out all air pockets and creases. Overlaps of adjacent membrane must be a minimum of 50 mm.
  • Immediately apply a second coat (0.8 - 1 kg/m2) of SikaCoat® while the first coat is still wet, to fully saturate the membrane from both sides.
  • When dry, apply a final top coat (~0.4 kg/m2) to complete the application. Protect from rain until dry.

CLEANING OF EQUIPMENT

Remove uncured surface SikaCoat® with water. Cured material can only be removed mechanically.

 

Documents